|

Reviews
Reviews
Manual
|
REVOLECTRIX Cellpro 4S, 4A Balancing Charger
Features :
- Cellpro 4S charger are able to charge Lithium Polymer, Lithium Ion, Lithium Manganese and A123© chemistries.
- Each cell is charged independently, providing exceptional charging safety and elevating RC
packs to the safety level of cellphones.
- Cellpro charger has a Low Voltage Restore feature that automatically attempts to repair overdischarged packs. Cells discharged as low as 0.5V may be repaired to as much as 98% of
capacity.
- Multifunction display shows operating mode, individual cell voltages, charge current, supply
voltage, and amount of charge (mAh) put into pack. Plus, the unique Fuel display shows percent
capacity remaining in a pack.
- Latest technology provides the ultimate in safety. Even charges packs having hidden physical
damage without danger of fire. A pack will not charge if individual cell voltages don’t equal
total pack voltage.
With Cellpro 4s balancing charger, you simply Plug-and-Play and Walk Away!
Size: 105mm x 87mm x 17mm
Weight: 215 grams (8.6oz)
Power Source: 10-16v DC input
Outputs: Single channel for any Cellpro battery pack.
Included in the package:
1. Cellpro 4S charger
2. 12V Clips for connecting charger to 12V battery source
3. JST-XHP balancing board
www.revolectrix.com click here for more revolectrix products and details. |
Price(SGD)
$90.00
|
|

Manual
Reviews
|
REVOLECTRIX Cellpro 10S, 10A Balancing charger
Features :
- 10A Max Charge Curreny; Continuous Power 300W
- Displays Individual Cell Internal Resistance to 0.1
mohm Resolution (Battery Quality Indicator, a feature
exclusive to the Cellpro 10s charger)
- Charges Lithium Polymer or A123 Cells (variable
charge rates for both LiPo and A123 cells).
- Charges 1 Pack of 1s-10s or 2 Packs of 1s-5s
Simultaneously
- Backlit Liquid Crystal Display
- Supports 2-way P.C. Interface
- Drive the Charger from the P.C.
- Advanced Features from the P.C. (Setup Custom
Presets, Adjust Speaker Volume, LCD Contrast)
- Internet Upgradability (IU) Feature -- No need to
send the charger to the factory for firmware upgrades
again. Do it over the internet.
- Cellpro 10s charger may be used to charge any
brand of Lithium pack using either the Cellpro
adapters or pigtails. The charger includes two 5s
output connectors and includes two simple 5s-to-4s
adapters. This enables automatic support for any
current Cellpro 2s-4s battery sold in the past.
- These extra accessories also enable you to connect
any of the existing Cellpro 4s adapters for other brand
batteries with the Cellpro 10s charger.
- Using the Cellpro 10s Charge Control Software, the
charger can be set to work with virtually any good,
regulated power supply, even if the power supply is
not designed for high power.
Included in the package:
1. Cellpro 10S charger
2. 12V Clips for connecting charger to 12V battery source
3. 2 6-pin to 5-pin node connector adapters (to enable Cellpro packs equipped with 5-pin connectors
to be charged using the Cellpro 10s Charger)
Items may required not included in the package:
1. Balancer Adaptors for charging
www.revolectrix.com click here for more revolectrix products and details. |
|
|

|
FUIM2: USB Interface Module
The FMA P.C. USB interface module is required to interconnect the new CellPRO10S charger to your personal computer's USB port, when information must flow both ways between the P.C. and the connected device. Used in tandem with the Control Software for the appropriate product, setup information, real time and historic information can be viewed on your Windows based computer.
Outputs: Standard P.C. USB Connector
Applications: Convert FMA telemetry data to U.S.B. Required for FMA Direct products requiring 2 way data communication between the P.C. and the product.
Features: Comes with USB Driver in CD ROM
Cellpro 10s Charger Control Software |
Price(SGD)
$25.00 |
|
 |
Cellpro 4S Balancer Adaptor Port
- use for cellpro 4S or 10S charger for up to 4 cell battery. se for cellpro charger |
Price(SGD)
$8.00 |
|
 |
Cellpro 6S Balancer Adaptor Port
- use for cellpro 10S charger for up to 6 cell battery. |
Price(SGD)
$12.00 |
|
 |
Circuit Protector
Used for 2S or 3S pack, it identifies cells above 4.21V during charging and redirects
charging current to bring cells to 4.2V to prevent overcharging hence prevent damage to the battery. To
be connected to pack while being charged with a serial conventional LiPo charger.
|
Price(SGD)
$18.00
|
|

|
E-Sky EK2-0852 Balance Li-po charger 1-4 cell
Specifications:
- Input Voltage:DC 11-15V
- Auto Adjustable current 0.2 - 1.5A
- Charges 1-4 cell Li-poly battery
- Maximum charge time:120minutes safety cutoff
|
Price(SGD)
$35.00
OUT OF
STOCK
|
|