Specification

Dimension: 40 x 30 x 9 mm / 1.65x1.1x0.43 in

Weight: 8 grams / 0.29 oz

Operating Voltage: 0V to 4.3V (input voltage higher than 4.3V or wrong polarity may result in damage to the tester)

* The lowest pin is 'negative' when facing the LED.

Price(SGD)

$13.00

come without extension wire

Features:

Designed for checking each individual cell voltage of Lithium polymer batteries, directly plug the voltage checker into the charging plug of the battery pack, it will display the voltage of each cell in turns from cell 1 to cell 3, and then repeat.

There are 3 decimal points on the LED screen which is used to indicate which cell it is measuring, when the point on right side light up, it indicates the first cell, and then will show the second cell voltage, and the middle point will light up, and then the third cell voltage, in the mean time, the left point will light up, if there is no second of third cell or if there is a spoil cell, it will display 'no'.

The decimal point on the LED is used for indicating the current cell, the right one denotes cell no. 1, the middle point denotes cell no. 2, the left point denotes cell 3. So when you see the LED shows 38.7, it does not mean the voltage is 38.7V, but 3.87V for cell No. 2.

Example of mounting onto Heli

Specification

Dimension : 28.5mm x 15mm x 4.6mm

Weight : 1.9g

Features:
The battery indicator can be use for 2 or 3 cell Li-po battery. Designed to indicate each individual cell. When the green LED light up the voltage of the cell is over 3.3V and when the red LED light up the voltage of the cell is under 3.3V.

Price(SGD)

$7.00