Price(SGD) $30.00

Hobby Wing Pentium-18A is ESC

1  Specification

1.1 Output: Continues 18A, Burst 22A up to 10 Secs.

1.2 Input Voltage: 5.6V --- 16.8V ( Lithium : 2 – 4s or NiMH/NiCd  5 -12 Cells)

1.3 BEC (Battery Elimination Circuit) Output：linear mode BEC 2A

1.4  Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrushLess Motor)

1.5 Size：24mm*45mm*11mm(width*length*height)

1.6 Weight: 19g

1.7 Packaging include: 3 gold plated motor connectors and heat-shrink tubings (Remark: motor connectors and heat-shrink tubings need to be purchased additionally)

2  Features   

2.1 Safety Arming Feature: Regardless the Throttle Stick position, the motor will not spin after battery connected. This will prevent any injury happened.

2.2 Throttle Calibration: Throttle range can be configured to provide best throttling linearity, fully compatible with all market available transmitters.

2.3 Programmable Items:

●Brake Settings：brake enabled / brake disabled, default is brake disabled

●Battery Type：Li-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd)，default is Li-xx.

●Low Voltage Protection Mode(Cutoff Mode) ：power reducing / power cutoff, default is power reducing.

●Low Voltage Protection Threshold(Cutoff Threshold) ：low / medium / high, default is medium cutoff voltage.

1)    For Li-xx battery，number of battery cells are judged automatically，low / medium / high cutoff voltage for each cell are: 2.6V/2.85V/3.1V. For example: 3 Cells Li-Poly, when medium cutoff voltage is set, the cutoff voltage is: 2.85*3=8.55V.

2)    For Ni-xx battery, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (0% means the low voltage cutoff  protection function is disabled) . For example: a 10 cells NiMH battery pack, fully charged voltage is 1.44*10=14.4V, when medium cutoff voltage is set, the cutoff voltage is : 14.4*45%=6.5V

●Startup mode: normal / soft / super-soft, default is normal startup.

●Timing: low / medium / high, default is medium timing. In normal cases, low timing can be used for most motors. But for high efficiency, we recommend the Low timing for 2 poles motor and Medium timing for 6 poles and above. For higher speed, High timing could be used.

 2.4 Full Protection Features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection.

3   Advantages

3.1 Military Standard Capacitor with extremely low resistance used on voltage input section, this will increase the ability of prevention of unwanted RF Noise/ Interference during flying.

3.2 Extreme low resistance, super current endurance.

3.3 Microprocessor and BEC use separate voltage regulator IC, with good anti-jamming capability.

3.4 Can be program with Hobbywing's Program Card.

Price(SGD) $55.00 $45.00

Hobby Wing Pentium-30A is ESC

1  Specification

1.1 Output: Continues 30A, Burst 40A up to 10 Secs.

1.2 Input Voltage: 5.6V --- 16.8V ( Lithium : 2 – 4s or NiMH/NiCd  5 -12 Cells)

1.3 BEC (Battery Elimination Circuit) Output：linear mode BEC 2A

1.4 Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrushLess Motor)

1.5 Size：24mm*45mm*11mm(width*length*height)

1.6 Weight: 25g

1.7 Packaging include: 3 gold plated motor connectors and heat-shrink tubings (Remark: motor connectors and heat-shrink tubings need to be purchased additionally)

2  Features   

2.1 Safety Arming Feature: Regardless the Throttle Stick position, the motor will not spin after battery connected. This will prevent any injury happened.

2.2 Throttle Calibration: Throttle range can be configured to provide best throttling linearity, fully compatible with all market available transmitters.

2.3 Programmable Items:

●Brake Settings：brake enabled / brake disabled, default is brake disabled

●Battery Type：Li-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd)，default is Li-xx.

●Low Voltage Protection Mode(Cutoff Mode) ：power reducing / power cutoff, default is power reducing.

●Low Voltage Protection Threshold(Cutoff Threshold) ：low / medium / high, default is medium cutoff voltage.

1)    For Li-xx battery，number of battery cells are judged automatically，low / medium / high cutoff voltage for each cell are: 2.6V/2.85V/3.1V. For example: 3 Cells Li-Poly, when medium cutoff voltage is set, the cutoff voltage is: 2.85*3=8.55V.

2)    For Ni-xx battery, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (0% means the low voltage cutoff  protection function is disabled) . For example: a 10 cells NiMH battery pack, fully charged voltage is 1.44*10=14.4V, when medium cutoff voltage is set, the cutoff voltage is : 14.4*45%=6.5V.

●Startup mode: normal / soft / super-soft, default is normal startup.

●Timing: low / medium / high, default is medium timing. In normal cases, low timing can be used for most motors. But for high efficiency, we recommend the Low timing for 2 poles motor and Medium timing for 6 poles and above. For higher speed, High timing could be used.

 2.4 Full Protection Features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection.

3   Advantages

3.1 Military Standard Capacitor with extremely low resistance used on voltage input section, this will increase the ability of prevention of unwanted RF Noise/ Interference during flying.

3.2 Extreme low resistance, super current endurance.

3.3 Microprocessor and BEC use separate voltage regulator IC, with good anti-jamming capability.

3.4 Can be program with Hobbywing's Program Card.

Price(SGD) $75.00 $63.00

Hobby Wing Pentium-40A is ESC

1  Specification

1.1 Output: Continues 40A, Burst 55A up to 10 Secs.

1.2 Input Voltage: 5.6V --- 26.0V ( Lithium : 2 – 6s or NiMH/NiCd  5 -18 Cells)

1.3 BEC (Battery Elimination Circuit) Output：Pentium-40A： (Switch mode BEC)：3A

1.4 Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrushLess Motor)

1.5 Size：Pentium-40A：28mm*55mm*12mm(width*length*height)

1.6 Weight: 33g

1.7 Packaging include: 3 gold plated motor connectors and heat-shrink tubings (Remark: motor connectors and heat-shrink tubings need to be purchased additionally)

2  Features   

2.1 Safety Arming Feature: Regardless the Throttle Stick position, the motor will not spin after battery connected. This will prevent any injury happened.

2.2 Throttle Calibration: Throttle range can be configured to provide best throttling linearity, fully compatible with all market available transmitters.

2.3 Programmable Items:

●Brake Settings：brake enabled / brake disabled, default is brake disabled

●Battery Type：Li-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd)，default is Li-xx.

●Low Voltage Protection Mode(Cutoff Mode) ：power reducing / power cutoff, default is power reducing.

●Low Voltage Protection Threshold(Cutoff Threshold) ：low / medium / high, default is medium cutoff voltage.

1)    For Li-xx battery，number of battery cells are judged automatically，low / medium / high cutoff voltage for each cell are: 2.6V/2.85V/3.1V. For example: 3 Cells Li-Poly, when medium cutoff voltage is set, the cutoff voltage is: 2.85*3=8.55V.

2)    For Ni-xx battery, low / medium / high cutoff voltages are 0%(ie. never cut off )/45%/60% of the startup voltage. For example: a 10 cells NiMH battery pack, fully charged voltage is 1.44*10=14.4V, when medium cutoff voltage is set, the cutoff voltage is : 14.4*45%=6.5V.

●Startup mode: normal / soft / super-soft, default is normal startup.

●Timing: low / medium / high, default is medium timing. In normal cases, low timing can be used for most motors. But for high efficiency, we recommend the Low timing for 2 poles motor and Medium timing for 6 poles and above. For higher speed, High timing could be used.

 2.4 Full Protection Features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection.

3   Advantages

3.1 Military Standard Capacitor with extremely low resistance used on voltage input section, this will increase the ability of prevention of unwanted RF Noise/ Interference during flying.

3.2 Seperate PCB for control circuit and MOSFET circuit: adiabatic air gap between control circuit PCB and MOSFET circuit PCB reduces the heat exchange form MOSFET to control circuit, so the ESC works more reliable.

3.3 Extreme low resistance, super current endurance.

3.4 Microprocessor and BEC use separate voltage regulator IC, with good anti-jamming capability.

3.4 Can be program with Hobbywing's Program Card.

Price(SGD) $35.00 $30.00

Mystery 30A Brushless ESC

Specification:
Constant Current: 30A
Input Voltage: 6V - 12.6V
Max Current: 40A
Low Voltage Cutoff: Auto Detect and Set
Size: 52mm X 24.5mm X 9.3mm
Weight: 27g (Net Weight)

Features / Functions:
Low Resistance
High rate PWM
Max 16 Cells (With BEC Disabled)
User programmable brake
Low voltage auto setting based on battery
Self adjusting Throttle Range
Soft start ramp up
Auto motor cutoff with reset
Turn motor in forward or reverse direction
Low torque start
Safety mode:
(1) the motor won't start no matter what the position of the control stick is when switch on the RC Unit
(2) Auto shut down when signal is lost

Package includes:
3 gold plated motor connectors and heat-shrink tubings

Price(SGD) $40.00

Hobby Wing Pentium-25A is ESC

1  Specification

1.1 Output: Continues 25A, Burst 35A up to 10 Secs.

1.2 Input Voltage: 5.6V --- 16.8V ( Lithium : 2 – 4s or NiMH/NiCd  5 -12 Cells)

1.3 BEC (Battery Elimination Circuit) Output：linear mode BEC 2A  

1.4 Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrushLess Motor)

1.5 Size：Pentium-25A：24mm*45mm*11mm(width*length*height)       

1.6 Weight: 22g       

1.7 Packaging include: 3 gold plated motor connectors and heat-shrink tubings (Remark: motor connectors and heat-shrink tubings need to be purchased additionally)

2  Features   

2.1 Safety Arming Feature: Regardless the Throttle Stick position, the motor will not spin after battery connected. This will prevent any injury happened.

2.2 Throttle Calibration: Throttle range can be configured to provide best throttling linearity, fully compatible with all market available transmitters.

2.3 Programmable Items:

●Brake Settings：brake enabled / brake disabled, default is brake disabled

●Battery Type：Li-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd)，default is Li-xx.

●Low Voltage Protection Mode(Cutoff Mode) ：power reducing / power cutoff, default is power reducing.

●Low Voltage Protection Threshold(Cutoff Threshold) ：low / medium / high, default is medium cutoff voltage.

1)    For Li-xx battery，number of battery cells are judged automatically，low / medium / high cutoff voltage for each cell are: 2.6V/2.85V/3.1V. For example: 3 Cells Li-Poly, when medium cutoff voltage is set, the cutoff voltage is: 2.85*3=8.55V.

2)    For Ni-xx battery, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (0% means the low voltage cutoff  protection function is disabled) . For example: a 10 cells NiMH battery pack, fully charged voltage is 1.44*10=14.4V, when medium cutoff voltage is set, the cutoff voltage is : 14.4*45%=6.5V.

●Startup mode: normal / soft / super-soft, default is normal startup.

●Timing: low / medium / high, default is medium timing. In normal cases, low timing can be used for most motors. But for high efficiency, we recommend the Low timing for 2 poles motor and Medium timing for 6 poles and above. For higher speed, High timing could be used.

 2.4 Full Protection Features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection.

3   Advantages

3.1 Military Standard Capacitor with extremely low resistance used on voltage input section, this will increase the ability of prevention of unwanted RF Noise/ Interference during flying.

3.2 Extreme low resistance, super current endurance.

3.3 Microprocessor and BEC use separate voltage regulator IC, with good anti-jamming capability.

3.4 Can be program with Hobbywing's Program Card.

Price(SGD) $95.00 $88.00

Hobby Wing Pentium-60A is ESC

Specifications:

• Output: Continues 60A, Burst 80A up to 10 Secs.
• Voltage Input: 5.6V --- 26.0V ( Lithium : 2 – 6s or NiMH/NiCd 5 -18 Cells)
• BUILT-IN SWITH MODE BEC (Battery Elimination Circuit) Output：3A；
• Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrusheLess Motor)
• Size：W28mm x L56mm x H18mm
• Weight: 45g
• Packaging include: 3 sets of gold plated motor connectors and heat-shrink tubings.

Features:

• Safety Arming Feature: Regardless the Throttle Stick position, the motor will not spin after battery connected. This will prevent any injury happened.
• Throttle Calibration: Throttle range can be configured to provide best throttling linearity, fully compatible with all market available transmitters.
• Programmable Items:
• Brake Settings：brake enabled / brake disabled, default is brake disabled
• Battery Type：Li-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd)，default is Li-xx.
• Low Voltage Protection Mode(Cutoff Mode) ：power reducing / power cutoff, default is power reducing.
• Low Voltage Protection Threshold(Cutoff Threshold) ：low / medium / high, default is medium cutoff voltage.

Advantages

• Military Standard Capacitor with extremely low resistance used on voltage input section, this will increase the ability of prevention of unwanted RF Noise/ Interference during flying.
• Extreme low resistance, super current endurance.
• Microprocessor and BEC use separate voltage regulator IC, with good anti-jamming capability.
• Can be program with Hobbywing's Program Card.